Comparing data storage technologies
SSD vs NVMe Hosting
SATA SSD or NVMe? Compare two generations of solid-state drives by speed, IOPS, latency and price. Find out why NVMe hosting makes a difference to your site performance and why BeoHosting uses NVMe on every plan.
SSD or NVMe for hosting?
NVMe is dramatically faster than SATA SSD: 3,500 MB/s vs 550 MB/s sequential (6-7x), 1,000,000 IOPS vs 100,000 (10x), latency 10μs vs 100μs (10x). NVMe uses the PCIe 4.0/5.0 protocol connected directly to the CPU, while a SATA SSD goes through SATA III (600 MB/s cap). NVMe is the 2026 standard — faster WordPress loads, MySQL queries and file operations. BeoHosting uses enterprise NVMe SSDs on every hosting plan.
- NVMe 7x faster (3,500 vs 550 MB/s)
- IOPS: 1,000,000 vs 100,000 (10x)
- Latency: 10μs vs 100μs
- PCIe 4.0/5.0 vs SATA III
- BeoHosting: enterprise NVMe on every plan
Tým BeoHosting
10+ let zkušeností — Specialisté na webhosting a infrastrukturu
- NVMe SSD
- SATA SSD
- PCIe
- IOPS
- Storage performance
- Enterprise SSD
- M.2 NVMe
- Datacenter storage
Naposledy aktualizováno:
SSD vs NVMe - The evolution of storage for hosting
SATA SSDs revolutionised the hosting industry when they replaced mechanical HDDs. With no moving parts, SSDs deliver 10-100x faster loading than an HDD. However, the SATA interface caps their speed at a maximum of 550 MB/s.
NVMe (Non-Volatile Memory Express) is the next generation of SSD technology. It uses the PCIe interface instead of SATA, which enables speeds up to 7,000 MB/s - over 12x faster than a SATA SSD. For hosting, NVMe means faster page loads, faster databases and better Core Web Vitals.
BeoHosting uses NVMe drives on every hosting plan at no extra cost. That means even our most affordable plan has enterprise-grade NVMe performance.
Srovnání table: SATA SSD vs NVMe
A side-by-side comparison of 13 key technical specifications.
* Values are based on enterprise-grade drives. Performance may vary depending on the model and configuration.
Why does NVMe make a difference for hosting?
For hosting, the key metric is not sequential speed but random IOPS (Input/Output Operations Per Second) and latency. When WordPress loads a page, it runs dozens of random queries against the database - each one requires a random read operation on the disk.
NVMe drives have 10x higher IOPS than a SATA SSD and 5-10x lower latency. In practice, this means a WordPress site on NVMe hosting can serve more concurrent visitors without performance degradation. TTFB (Time To First Byte) is typically 30-50% lower on NVMe hosting.
NVMe drives also use the NVMe protocol, which has 65,535 queues with 65,536 commands each, while SATA uses the AHCI protocol with just a single queue of 32 commands. This is critical for shared hosting where hundreds of sites share the same disk.
NVMe (BeoHosting) - Advantages
- Up to 7,000 MB/s read speed
- 10x higher IOPS than SATA SSD
- 5-10x lower latency
- Better performance under load
- Faster databases (MySQL/MariaDB)
- Better Core Web Vitals scores
- Lower CPU overhead
- Enterprise-grade reliability
SATA SSD - Advantages
- Lower price per GB (20-30% cheaper)
- Lower power consumption
- More widely available and compatible
- Sufficient for static sites
- Good reliability (1.5M hours MTBF)
- Dramatically better than an HDD
Real-world hosting performance: NVMe vs SSD
In real hosting conditions, the difference between NVMe and SATA SSD is best seen on the following metrics:
WordPress load (no cache): SATA SSD average 1.2s, NVMe average 0.6s - twice as fast. The gap is even bigger for WooCommerce pages with many products where the database runs more queries.
Concurrent users: a SATA SSD server can serve around 500 concurrent users without degradation. An NVMe server can serve 2,000+ concurrent users thanks to higher IOPS and lower latency.
Time to First Byte (TTFB): a SATA SSD typically delivers a TTFB of 200-400ms, while NVMe reaches 80-150ms. Google recommends a TTFB under 200ms for optimal SEO - which is easier to achieve on NVMe hosting.
Conclusion: NVMe is the standard for modern hosting
In 2026, NVMe drives are the standard for quality hosting. SATA SSDs are enough for static sites, but for WordPress, WooCommerce, databases and sites under load - NVMe is essential for optimal performance.
BeoHosting uses NVMe drives on every plan - from the most affordable shared hosting to dedicated servers. There is no "NVMe upgrade" or extra cost. Every customer gets enterprise-grade NVMe performance at the standard price.
For more information about our hosting plans with NVMe drives, view our hosting offers or contact us.
Připraveni spustit svůj web?
Připojte se k více než 4 000 spokojeným zákazníkům. Bezplatná migrace a 15denní záruka vrácení peněz.
FAQ: SSD vs NVMe hosting
Odpovědi na nejčastější dotazy o našich službách.
Naše záruky pro váš klid
Chráněni ze všech stran
15denní záruka
V prvních 15 dnech vracíme peníze bez otázek.
Bezplatná migrace
Váš web přemigrujeme bez výpadku — vy neuděláte nic.
Podpora 24/7
Naši odborníci jsou tu 24/7 prostřednictvím ticketů a live chatu.